The invoice-to-pay process explained for accounts payable teams
- Introduction
- What is the invoice to pay process?
- How does the invoice to pay process differ from procure to pay and accounts payable?
- The stages of the invoice to pay process
- How do PO and non-PO invoices move through the invoice payment process?
- How does invoice to pay automation change the process?
- How to build AP automation for the invoice to pay process
- Keep your invoice to pay process from running your close
Effortless expenses start here.
Introduction
Accounts payable (AP) managers at mid-market companies know the invoice-to-pay process on paper, but once invoice volume climbs, the work gets scattered across inboxes and email threads. General ledger (GL) coding runs on memory, and reconciliation turns into a month-end scramble. If you’re the Controller, you own the close that absorbs much of it, often without a single view of where an invoice sits or who’s blocking it.
Invoice-processing time measures how long an invoice takes to move through a defined set of processing steps, such as receipt through approval and payment scheduling. End-to-end invoice-to-pay time also includes the wait until payment, which can reflect agreed payment terms rather than a processing delay. Two AP teams of the same size can post different processing times when one routes every invoice through a shared intake queue and the other relies on whoever sees the email first. The sections below follow an invoice from arrival to archived payment.
A controlled invoice-to-pay workflow gives AP one intake queue and one set of checks every invoice runs through. Approvals get documented, and payment records are easier to reconcile at close when the workflow is set up correctly. Each check exists to catch a specific problem, such as a duplicate invoice, a mismatched amount, or an approver acting outside their limit. We suggest you use this guide along with your professional advisor when making business decisions.
What is the invoice to pay process?
The invoice-to-pay process is the full AP workflow for a vendor invoice. It begins when the invoice arrives, and ends when the payment posts to the GL and the supporting documents are filed. It covers intake, data validation, purchase order (PO) matching, GL coding, approval routing, payment, and reconciliation. Cash flow visibility depends on it, and so do internal controls for accounting and vendor relationships.
When the workflow runs well, vendors get paid on time, and the close becomes predictable. The audit trail builds as work happens. Much of the downstream accounts payable process depends on this workflow producing clean, usable data.
Brex, the intelligent finance platform, gives AP teams one workflow from invoice capture to payment with Brex bill pay.
How does the invoice to pay process differ from procure to pay and accounts payable?
Invoice-to-pay, procure-to-pay, and accounts payable get used almost interchangeably, but each term covers different ground. The difference matters most when a problem starts upstream of AP, since the team that sees the symptom is not always the team that owns the cause. The three definitions below separate the scope of each term.
- Invoice-to-pay (I2P): This is the AP-owned workflow from invoice receipt to payment and posting. It starts when a vendor document arrives and ends when AP reconciles and archives the payment. A Controller managing this workflow doesn’t necessarily own the procurement steps that come before it.
- Procure-to-pay (P2P): This is the broader cycle covering purchase requests and approvals, relevant supplier and contract activities, purchase orders, receipt confirmation, invoice processing, and payment. Procurement and finance typically share responsibility for P2P. AP typically leads I2P, with participation from business approvers, procurement, treasury, and accounting as needed.
- Accounts payable (AP): This refers to both the finance function and the balance-sheet liability. The AP team typically leads the I2P workflow and may maintain vendor records used for payment and compliance checks. Depending on the organization, AP also supports period-end accruals and works with treasury and finance leadership on payment terms, days payable outstanding, and working-capital objectives.
When evaluating AP automation tools, businesses typically map each product’s capabilities to the stages their team needs. Then, they usually confirm whether it supports purchase requests and purchase orders, invoice capture and matching, approval routing, payment execution, and accounting integration. From there, they would ask the vendor to demonstrate the relevant workflows, since a P2P or AP automation label alone does not establish the product’s scope.
The stages of the invoice to pay process
A vendor document moves through a defined sequence on its way from arrival to archived payment. Each stage has an owner, an output, and a common manual constraint AP can design around. When one stage goes wrong, the effect doesn’t usually stay contained to that stage. An error at intake or coding can resurface during approval, payment, or close. These invoice processing steps stay the same whether the work runs in an inbox or in an AP platform.
Stage | Owner | Output | Common failure point |
|---|---|---|---|
Invoice receipt through intake | AP intake | Logged invoice in a shared queue | Invoices land outside the workflow |
Vendor verification | AP staff | Validated invoice matched to vendor master | Duplicate invoices slip through manual review |
PO matching with exception handling | AP staff, approver | Matched invoice or flagged exception | Non-PO invoices lack a PO and need alternative supporting evidence |
GL coding for cost allocation | AP staff | Coded invoice ready for approval | Similar expenses get coded inconsistently |
Approval routing for authorization | Named approver | Authorized invoice | Approvers miss the message or lack context |
Payment execution through reconciliation | AP, treasury | Posted payment, reconciled sub-ledger | Separation of duties exists only on paper |
The stages of the invoice to pay process
Invoice receipt through intake
Invoices arrive by email attachment, vendor portal, electronic data interchange (EDI), physical mail, and AP platform upload. A mid-market team may deal with several channels at once. Without a single entry point, AP may lose visibility early. Invoices can land in department heads’ inboxes, get forwarded days later, or stay outside the workflow until the vendor follows up. They may surface at month-end as surprises that force rushed accruals and last-minute payment runs.
A single dedicated intake channel, whether an AP email alias or a vendor portal, reduces that variability. Invoices enter the same way and become visible immediately. From arrival, the AP platform tracks each document in a shared queue for the rest of invoice processing.
Vendor verification
AP checks the invoice against the vendor master, confirming the vendor exists, banking details are current, and the amount matches contract pricing or agreed terms. AP staff review the document itself for completeness, including invoice number, date, amount, currency, and line-item details. Duplicate invoices with the same vendor and amount but a slightly different date regularly slip through manual review, which is why controls that prevent duplicate payments need to run here.
A change to a vendor’s banking details generally warrants a second verification that is separate from the original request. Business email compromise (BEC) is a scam in which criminals send a message that appears to come from a known source, such as a vendor, with a request that looks legitimate. The FBI’s guidance on these scams describes an invoice apparently sent by a regular vendor with an updated mailing address as one common example, and it advises verifying any change in account number or payment procedures with the person making the request. For phone verification, the FBI advises looking up the company’s number independently instead of using the one supplied in the message, so AP typically uses an independently verified number, such as a previously validated number in the vendor master.
PO matching with exception handling
PO-backed invoices go through two-way invoice matching in accounts payable, comparing the invoice against the purchase order. Goods-based spend often adds a third comparison against the receiving document before the invoice moves forward. When the numbers align, the invoice proceeds to the next stage.
When the numbers don’t align, the invoice drops into an exception queue for manual resolution. This could be from a price variance, missing receipt, or wrong PO number. Resolving an exception usually means AP contacting the buyer or the vendor for a correction, and the invoice waits in the queue until that answer arrives.
Configurable match tolerances can cut unnecessary exceptions. Invoices that fall within policy automatically move forward while the ones that fall outside it get routed to review. Exception rates also tend to track how closely buyers follow PO rules and how accurate the vendor master is. That makes match configuration a high-value change for a team with frequent PO exceptions.
GL coding for cost allocation
AP teams commonly assign each invoice line to several coding fields, based on company policy and applicable accounting standards. The exact set of fields varies by company and by ERP. A coded invoice typically carries some or all of the following.
- GL account
- Cost center
- Department
- Project or job code
- Entity, for multi-entity accounting
- Accounting classification
Those decisions determine where the expense lands in the profit and loss statement, the balance sheet, and the accounts payable reporting that compares budget to actual spend. A coding error made in week two can resurface as a reclassification at close. Consult a qualified accounting professional for guidance on your company’s specific accounting treatment.
Coding that runs on memory is what can cause inconsistency at this stage. Similar expenses get coded differently across months depending on who processed them, and ambiguous invoices sit in a pending queue until someone senior makes the call. When the ERP’s accounting fields are imported into the AP platform, coders pick from the company’s own chart of accounts instead of typing codes from memory, which keeps similar invoices on the same path regardless of who processes them.
Approval routing for authorization
The coded invoice routes to the right approver based on the delegation of authority matrix, or the chart that says who can approve what. That matrix maps amount, vendor type, department, and cost center to a named role. The approver reviews whether the spend is legitimate, properly coded, and within budget, then clears it for payment.
Email-based routing most often creates delays when approvers miss the message or go on leave without delegating. Invoices may also stall when approvers lack enough context to approve confidently. Stalled approvals can be a major reason invoices age out, and payments go late.
Where the AP platform supports them, teams can configure reminders, delegation, and escalation rules to reduce manual follow-up. Approval records usually capture who acted and when, so the evidence is available for review and audit. A written accounts payable policy typically identifies backup approvers and explains how overdue approvals are reassigned.
Payment execution through reconciliation
Approved, coded invoices get batched into a payment run by ACH, wire, card, or check. Depending on company policy, an authorized approver who’s different from the payment initiator releases the batch, transmits it to the bank, and posts it to the GL. The payment gets matched against the bank statement and the vendor’s remittance record. Separation of duties (SoD) can exist only on paper in mid-market AP, where one person enters, codes, and releases.
When payment data posts automatically to the enterprise resource planning (ERP) system, which is the software that runs finance and accounting, the AP team can run accounting reconciliation between the AP sub-ledger and the bank account more often. With strong data quality and review controls, that reconciliation can run daily. The sub-ledger is the detailed AP record that supports the GL, and daily matching reduces the number of reconciliation items AP has to resolve at close.
Invoice payment methods and timing
Each payment method carries its own timing and control tradeoffs. Checks can travel slowly and add a manual step when they are cashed, and wires can be hard to recall once sent, so many AP teams reserve wires for situations where speed matters more than reversibility. ACH and virtual card payments can be scheduled in the AP platform ahead of the due date, which gives approvers a chance to review the payment before it is released.
How do PO and non-PO invoices move through the invoice payment process?
PO invoices and non-PO invoices enter the same intake queue but diverge at the matching stage. PO invoices carry a reference to an approved purchase order, so AP can match quantities and prices systematically and route only the exceptions to a person. Non-PO invoices such as rent, utilities, professional services, and subscriptions have no purchase order to match against, so the review depends on AP staff judgment and the approver’s knowledge of the contract.
That missing reference point often sends non-PO invoices to an approver who may not know what to check. AP teams commonly narrow the risk with recurring-invoice templates, vendor-level approvers, and spend category thresholds, so a utility bill and a one-time consulting invoice do not follow the same path. Non-PO invoices also tend to produce more coding questions, since no buyer assigned a category at the time of purchase.
Teams reviewing the split often start by measuring what share of invoice volume is non-PO. A high non-PO share points toward approval and coding controls as the main lever, while a high PO exception rate points toward matching rules and PO discipline. Seeing the two numbers side by side helps AP explain where cycle time is going to the Controller and to procurement.
How does invoice to pay automation change the process?
Automation can capture invoice data and run validation checks before an invoice reaches an approver. Earlier checks can reduce re-keying and help AP focus on exceptions that require judgment. The examples below follow the workflow from intake through payment and accounting updates.
AI capture replaces manual data entry at intake
Optical character recognition (OCR) and AI in accounting pull the vendor name, invoice number, amount, date, and line items the moment an invoice arrives. Once your team configures capture and routing rules, the system can log, timestamp, and route a standard PO invoice without a human touch. Invoices that previously sat unprocessed in an inbox can enter the workflow within minutes. Capture becomes the natural first phase of a paperless accounts payable rollout.
Exception queues can shrink when matching runs before approval
Automated field-level checks and configurable match tolerances catch mismatches at intake before they surface mid-approval. Duplicate detection flags same-vendor, same-amount submissions before they reach an approver. Well-configured matching and duplicate-detection rules give approvers cleaner, validated invoices, so the exception queue holds mostly genuine discrepancies that need human judgment.
ONEflight International, a private jet charter broker, sends about 30 wires a day to aircraft operators, and its flight coordinators sometimes email both a quote and an invoice for the same trip. CFO Hanno Uys said Brex flags those duplicates so the team does not pay the same amount twice. “A lot of times the flight coordinators will send us a quote and then they will send a quote and an invoice, so Brex identifies when there are duplicates, so we can easily make sure we don't pay something twice,” Uys said. Individual customer results vary.
Approval bottlenecks become measurable and enforceable
Rule-based routing can replace manual forwarding. Where supported and configured, reminders and escalation rules help teams address overdue approvals. Approval records and status reporting can show who acted, when they acted, and where an invoice is waiting. These records support follow-up and audit preparation.
Payment release through GL posting can happen without re-keying
Connected systems can reduce re-keying across invoice approval, payment execution, and accounting updates. These remain separate events, with timing determined by the payment method, integration, and configuration. Teams usually reconcile the AP subledger to the GL and recorded cash activity to bank statements.
Brex bill pay connects to NetSuite, QuickBooks Online, Xero, and Sage Intacct. Sync direction, timing, and supported records vary by integration and configuration. Brex also supports ACH, wire, check, and one-time virtual card payments. For a one-time virtual card, the designated cardholder or vendor must process the payment using the card details; scheduling the card does not automatically pay the invoice.
How to build AP automation for the invoice to pay process
AP automation pays off fastest where the friction is worst, and that stage isn’t the same for every team. A phased rollout keeps this a sequence you finish, instead of a project that stalls once the intake channel is built. The four steps below offer a practical rollout sequence, which teams can adapt to their existing systems, controls, and highest-friction stages.
Finding the highest-friction stage before you pick a tool
Teams often start by pulling three numbers by stage, which are cycle time, exception rate, and touchless processing rate, the share of invoices handled with no manual steps. A team with a low exception rate but a slow cycle time usually has an approval bottleneck, since matching and coding are already running clean. Starting where the data points, instead of wherever the vendor demo looked most impressive, keeps the rollout focused on the stage costing the team the most time.
Automating intake and validation before anything downstream
Every later stage depends on clean data arriving at intake, so capture and duplicate detection come first, ahead of approval routing or payment automation. An accounts payable software evaluation tends to test this stage directly, timing how fast a new invoice gets logged, coded, and flagged for duplicates without a human touching it first. When this stage is wrong, every automation built on top of it can inherit the same bad data.
Layering in rule-based approval routing once intake holds up
Approval automation only pays off once the invoices reaching it are already validated, so build this stage second. Teams typically configure thresholds by amount, vendor type, and department, then set an SLA with automatic escalation so a stalled invoice moves to a delegate instead of sitting in an inbox. Routing rules built on messy intake data just automate the same delays the manual process had.
Connecting payment execution and reconciliation last
Payment automation depends on everything upstream working, since a payment run pulls its data from invoices that are already approved and coded. Brex bill pay is one option built around that last-mile connection. Teams that automate payment before intake and approval often end up automating a process that was already unreliable.
Keep your invoice to pay process from running your close
The workflow determines how cash goes out, how the GL gets built, and how a Controller proves financial controls work. Reducing fragmentation keeps the close predictable, vendor status clear, and evidence easy to find. Teams often start with the highest-friction stage in their own workflow, whether that turns out to be approval routing or GL coding, and fix it before moving to the next. Strong accounts payable best practices keep that process healthy between audits, giving AP fewer surprises and leadership numbers it can trust.
Brex bill pay brings intake, approval routing, payment, and ERP sync into one workflow, depending on customer configuration. Approval workflows and spending limits are set in the same intelligent finance platform, which keeps the controls described above in a single place. Teams that also want AP tied to cash management can fund payments from a Brex business account or an external account, so payments and reconciliation share one record.
For teams that also pay vendors by card, the Brex corporate card has no personal guarantee and no annual card fee; platform subscription fees may apply separately. Brex bases underwriting on business metrics and advertises credit limits up to 30x higher than traditional business credit cards, subject to eligibility and underwriting. Spending limits are set by Brex using company data and can change over time, and terms, eligibility, approvals, limits, fees, and experiences vary by customer and issuer.
Created with AI assistance and reviewed by Brex. This article reflects Brex's perspective at the time of publication and is intended for general informational purposes only. It is not intended as legal, tax, accounting, or financial advice. Laws, regulations, and guidance may vary based on your specific circumstances, and interpretations or outcomes may differ. Information may also change over time. Before making any decisions, you should consult your own qualified legal, tax, accounting, or financial advisors.
The testimonials on this website are from actual Brex and Brex Treasury clients, and reflect their personal experiences and opinions. Please note:
Testimonials may not represent the experiences of all clients, which can vary based on individual goals, market conditions, and services used.
They are not guarantees of future results. All investments carry risk, including potential loss.
Clients were not compensated for their statements.
Testimonials are presented as provided, without substantive edits.
Prospective clients should conduct their own due diligence, consider their financial circumstances, and consult a qualified professional before making investment decisions.
Brex, the intelligent finance platform, helps AP teams search and approve bills, then sync payments to their ERP.
Written By
Written By
Yolanda La
Yolanda La is a Senior SEO Manager at Brex. Having spent 5+ years in B2B fintech and SaaS building deep expertise across corporate cards, expense management, and business banking, she's currently putting that knowledge to work here at Brex. In her writing, she blends her background in business finance and search to deliver actionable insights for her readers. Prior to this, Yolanda helped drive organic growth for companies like BILL and Essex Property Trust. She holds a BA in Business Economics from UC Irvine.
Frequently asked questions about the invoice to pay process
See what Brex can do for you.
Learn how our spend platform can increase the strategic impact of your finance team and future-proof your company.
See what Brex can do for you.
Learn how our spend platform can increase the strategic impact of your finance team and future-proof your company.